CITCA > Courses > Warehouse


CITCA’s training courses are taught by industry subject matter experts, and CITCA programs have been recognized and accepted by OSHA, and accepted by all major industry leaders including Bechtel, American Tower, AT&T, T-Mobile, Verizon, Sprint, Crown Castle, SBA, Goodman Networks, and many others. All CITCA training programs meet or exceed ANSI and OSHA standards. With 6 regional training location across the US, our goal is to make CITCA training easy to access and affordable to clients in any part of the nation. We also provide on-site training at our customers locations.

Student/Instructor Ratio for all practical skills / competency based classes 8:1

All CITCA programs meet or exceed OSHA, ANSI, and NATE CTS

OSHA 10: Construction Industry Outreach Training Program

Course Length: 2 Days/10 Hours

The OSHA 10 Hour Construction Industry Outreach Training Program is intended to provide an entry level construction worker’s general awareness on recognizing and preventing hazards on a construction site. The course will cover all required OSHA modules including:

  • Introduction to OSHA and the OSH Act
  • General safety and Health Provisions
  • Health Hazards: Hazard Communication
  • Health Hazards: Hazardous Materials
  • Cranes and Rigging
  • Focus Four: Electrical Safety
  • Struck-By and Caught in Between
  • Fall Protection
  • Personal Protective Equipment
  • Hand and Power Tools
  • Scaffolds
  • Stairways and Ladders


Course Length: 5 Days/30 Hours

The OSHA 30-hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry.

Note: The 30 Hour General Industry Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues including:

  • Introduction to OSHA and the OSH Act
  • Basic Safety Orientation
  • Walking & Working Surfaces
  • Emergency Action Plan
  • Hazardous Materials
  • Hazwoper
  • Personal Protective Equipment
  • Confined Spaces & Permit Required Confined Spaces/li>
  • Lockout/Tagout
  • Materials Handling & Storage
  • Machine Guarding Safety
  • Welding, Cutting, and Brazing
  • Electrical Safety
  • Hazard Communication
  • Hazardous Substances & Industrial Hygiene
  • Bloodborne Pathogens
  • Record Keeping & Reporting
  • Workplace Violence
  • Safety and Health Programs
  • Ergonomics
  • Hazards of Asbestos in the Workplace
  • Lead Safety in the Workplace
  • Ionizing and Non-Ionizing Radiation Safety
  • Formaldehyde Awareness
  • Process Safety Management of Highly Hazard Materials

Certified Rigger Level 1

Course Length: 1 Day/8 Hours

NCCCO has identified the following job duties for Rigger Level I certification which CITCA Rigger Training conforms to. A Certified Rigger Level I can perform simple, repetitive rigging tasks when the load weight, center of gravity, the rigging, and rigging configuration are provided or known by the rigger through experience or on-the-job training prior to the rigging activities. Specifically, Level I Riggers should be able to demonstrate or have knowledge of how to:

  • Inspect rigging before use
  • Identify and attach rigging with basic knowledge of hitch configurations, capacities, and basic knots
  • Recognize associated hazards
  • Signal operations
  • Use various types of rigging equipment and basic hitches and their applications

Certified Rigger Level 2

Course Length: Multiple options available, consult your CITCA representative for more information.

In addition to knowing and demonstrating Rigger Level I knowledge and skills, a Certified Rigger Level II can select rigging components and procedures based on rigging capacity. A Level II Rigger can perform the following rigging tasks unsupervised:

  • Estimate load weight and center of gravity
  • Identify lift points
  • Determine and select rigging based on loading
  • Perform pre-use inspection of rigging and lift points
  • Identify and attach rigging with knowledge of hitch configurations and load angle factors, rigging capacities, and load integrity
  • Understand load dynamics and associated hazards

As applicable, Level II Riggers will also have a working knowledge of hoisting equipment, winches, jacks, industrial rollers, and similar equipment.

Fork Lift

Course Length: 6-8 Hours (depending on class size)

This is an essential training program for personnel who inspect and operate industrial and/or rough terrain forklifts. Students will become knowledgeable of the OSHA and ANSI inspection requirements, receive preoperational and periodic inspection checklists, and learn how to properly document the inspection. Safe operating practices and procedures are also covered.

Scissor Lift/Aerial Lift

Course Length: 1 Day

According to the Occupational Safety & Health Administration (OSHA), Aerial lifts include boom-supported aerial platforms, such as cherry pickers or bucket trucks. The major causes of fatalities are falls, electrocutions, and collapses or tip overs. OSHA goes on to state several “safe work practices” for Aerial Lift such as, ensure that workers who operate aerial lifts are properly trained in the safe use of the equipment, maintain and operate elevating work platforms in accordance with the manufacturer’s instructions, never override hydraulic, mechanical or electrical safety devices. CITCA has developed this training to assist employers in complying with the OSHA regulation (29 CFR 1910.67 & 29 CFR 1926.451-454) about aerial & scissor lift safety.


Course Length: 1/2 Day

This course is user only training. All scaffold users must be trained in the hazards associated with scaffold use as per 1926.454(a). Course length one half day. Note: this course does not cover the topics necessary to conduct the work shift inspection.

Ready to get started? Contact us today to bring the CITCA difference to your company.