CITCA > Courses > Digital Installation/Maintenance


Designed for those who work in the Wireless Internet, Satellite, Cellular, and the Radio Communications industries, CITCA’s training courses are taught by industry subject matter experts, and CITCA programs have been recognized and accepted by OSHA, and accepted by all major industry leaders including Bechtel, American Tower, AT&T, T-Mobile, Verizon, Sprint, Crown Castle, SBA, Goodman Networks, and many others. All CITCA training programs meet or exceed ANSI and OSHA standards. With 6 regional training location across the US, our goal is to make CITCA training easy to access and affordable to clients in any part of the nation. We also provide on-site training at our customers locations.

Student/Instructor Ratio for all practical skills / competency based classes 8:1

All CITCA programs meet or exceed OSHA, ANSI, and NATE CTS

Rooftop Fall Protection

Course Length: 1 Day/8 Hours

This training will provide the worker a comprehensive Rooftop Fall Protection training experience designed for working on roof top and extension ladders (less than or up to 40’ in extended length). Upon completion, students will understand OSHA and ANSI standards as they apply to rooftop fall protection. In addition, each student will have the knowledge and skills to be designated ‘competent rooftop’, as they will be trained to identify unsafe acts and unsafe conditions in rooftop operations.

This course will cover:

  • Introduction to Fall Protection and explanation of Fall Protection systems
  • Rules & Regulations Overview – OHSA, ANSI
  • Responsibilities of various training levels
  • Personal Protective Equipment (PPE)
  • Ladder Safety Systems
  • Work area – Flat roof, low slope, steep roof
  • Safety systems – Horizontal and self retracting lifelines, guardrails, safety nets, calculated clearances
  • Emergency plan – Review current/Assistance in developing an EAP
  • Rescue plans – Self, assisted, plan development

Upon completion of the classroom session, students will relocate to a practical skills training site. Proper skills and techniques will be taught to the student, and students will provide return demonstrations to the CITCA instructors. Each student will be evaluated for his/her competencies by the instructor, and the student’s compliance with proper skills and techniques will be documented and submitted to their employer.

This training will incorporate the most updated version of the OSHA 1910 Walking/Working surfaces standard.

RF Safety and Site Hazard Awareness

Course Length: 1 Day/8 Hours

PART 1: RF (Electromagnetic) Safety

Safe work practices start with recognizing hazards and taking steps to minimize the risk to the worker. For work sites involving potentially hazardous radiofrequency radiation, the tower technician should evaluate the RF protection component of the overall program. This presentation will discuss the safety features necessary for the protection of the technician working in an RF environment. These include measurements to evaluate the effectiveness of RF controls; to ensure proper maintenance of RF radiating equipment; to develop work practices to minimize exposures; to obtain information to be used in training workers regarding their potential hazards and how they are controlled; to identify “RF Hazard” zones and other areas requiring signs and training; to determine the need for medical surveillance; as an alternative or enhancement of Lockout/Tagout procedures; to evaluate the effectiveness of RF personal protective equipment; and as a periodic audit of the effectiveness of the RF Protection Program.

Content includes:

  • Basic Definition
  • Electric and Magnetic Fields
  • Health Effects of RF-Microwave Radiation
  • RF-Microwave Protection and Safe Work Practices
  • RF-mw Measurement
  • Regulations, Standards and Guidelines
  • Elements of the Hazard Control Program

PART 2: Site Safety Awareness

Every job related accident can be traced back to one of two factors: unsafe acts (human) or unsafe conditions (environmental). The 4 hour segment on job site safety looks at accidents caused by both, and “lessons learned” from these accidents. It also looks at safety short-cuts, and the critical outcomes that come about as the result.

This segment will familiarize the student with the recommended signage to be utilized on most communications related job sites and equipment to assure personnel and equipment safety.

To achieve compliance, this course addresses the following standards:

  • OSHA 1910.1200 – Hazard Communication
  • OSHA 1910.1201 – DOT Markings Placards and Labels
  • OSHA 1910.144 – Marking Physical Hazards
  • OSHA 1910.147 – Lockout – Tagout
  • DOT 49 CFR – Hazmat Regulations

Course content includes:

  • Construction Site Signage and Information
  • Emergency Contact/Response Information
  • Material Safety Data Sheets
  • Hazard Communication Labels/Signs
  • Signage and Labeling
  • Workplace Safety Signage
  • Site/Work Zone Signage
  • Equipment Signage – Capacity Charts/Graphs
  • Transport Safety Signs
  • Traffic Control – Flagger Safety
  • Tower Signage – Hand Signals
  • Confined Space Signage
  • Utility Safety Signage
  • Fire Safety Signage
  • Personal Protection Signs/Symbols
  • Final Exam

OSHA 10: Construction Industry Outreach Training Program

Course Length: 2 Days/10 Hours

The OSHA 10 Hour Construction Industry Outreach Training Program is intended to provide an entry level construction worker’s general awareness on recognizing and preventing hazards on a construction site. The course will cover all required OSHA modules including:

  • Introduction to OSHA and the OSH Act
  • General safety and Health Provisions
  • Health Hazards: Hazard Communication
  • Health Hazards: Hazardous Materials
  • Cranes and Rigging
  • Focus Four: Electrical Safety
  • Struck-By and Caught in Between
  • Fall Protection
  • Personal Protective Equipment
  • Hand and Power Tools
  • Scaffolds
  • Stairways and Ladders


Course Length: 5 Days/30 Hours

The OSHA 30-hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry.

Note: The 30 Hour General Industry Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues including:

  • Introduction to OSHA and the OSH Act
  • Basic Safety Orientation
  • Walking & Working Surfaces
  • Emergency Action Plan
  • Hazardous Materials
  • Hazwoper
  • Personal Protective Equipment
  • Confined Spaces & Permit Required Confined Spaces/li>
  • Lockout/Tagout
  • Materials Handling & Storage
  • Machine Guarding Safety
  • Welding, Cutting, and Brazing
  • Electrical Safety
  • Hazard Communication
  • Hazardous Substances & Industrial Hygiene
  • Bloodborne Pathogens
  • Record Keeping & Reporting
  • Workplace Violence
  • Safety and Health Programs
  • Ergonomics
  • Hazards of Asbestos in the Workplace
  • Lead Safety in the Workplace
  • Ionizing and Non-Ionizing Radiation Safety
  • Formaldehyde Awareness
  • Process Safety Management of Highly Hazard Materials

Red Cross First Aid/CPR/AED

Course Length: 1 Day/8 Hours

With an emphasis on hands-on learning, our Red Cross First Aid/CPR/AED courses give you the skills to save a life. All course options align with OSHA’s Best Practices for Workplace First Aid Training Programs and are available in classroom and blended learning formats. A digital certificate is issued upon successful course completion with anytime, anywhere access to certificate and training history. 2 year certification.

First Aid: Learn how to respond to common first aid emergencies, including burns; cuts; head, neck and back injuries and more.

CPR/AED: Learn how to respond to cardiac and breathing emergencies in adults, including the use of automated external defibrillators (AED).

Ready to get started? Contact us today to bring the CITCA difference to your company.